EWN001 Bluetooth Earpiece for Retevis Bluetooth Radios
Retevis already has launched several Bluetooth radios. We have launched a Bluetooth headset recently—EWN001 Bluetooth Earpiece. It can be used not only with the new retevis RB37/RB637/RB89/RB689/RB39P/RB639P, but also with mobile phones/tablets. Do you interest in learning about it?
1/What does EWN001 look like?
The earpiece is only 13.4g, and the dimensions is 56*17*12mm, Type-C charging, easy to carry and use.
2/What’s in the EWN001 Bluetooth Earpiece package
3/Bluetooth headset operating instructions:
1. Power on/off button: Press and hold for 1 second to power on, and then long press for 3 seconds to power off.
2. + key: volume +
3. – Key: Volume –
4.PTT key:
A. There are three transmission methods for pairing the Bluetooth headset with the walkie-talkie:
1. Short press the side button ptt to launch continuously, and then short press again to end the launch.
2. Long press the side button ptt to launch, release it to end the launch.
3. Touch the panel to launch the fingerprint ptt, release it to end the launch.
B. When the mobile phone is connected, short press the ptt button to play/pause, answer/hang up, and double-click the ptt button to make a call.
5. Touch PTT: touch the walkie-talkie to transmit, release to stop transmission
6. Connect new device:
Press and hold the on/off button for 5 seconds in the off state to enter the pairing mode
7. Clear connection memory:
Press the PTT key 4 times in the power-on state to hear a “beep” to clear the Bluetooth connection memory, and the Bluetooth headset will automatically enter the pairing mode after restarting the power. The walkie-talkie needs to close the Bluetooth pairing mode and enter the Bluetooth pairing mode again to pair.
Note: (After unpairing, if the walkie-talkie does not exit and re-enter the pairing mode, it cannot be paired with the Bluetooth headset)
8.APP upgrade:
In the power-on state, double-click the on/off button 5 times to enter the APP upgrade mode
9. Indicator light:
| Bluetooth earpiece working status | LED indicator |
| Power on | Blue light on |
| Bluetooth not connected | Blue light flashing fast |
| Bluetooth connected | Flashes every 5 seconds (red light is always on when Bluetooth is connected if the voice control function is enabled) |
| Bluetooth pairing | red and blue lights flash alternately |
| On call | red light is always on |
| Low battery | red light flashes 1 time every 5 seconds |
| Power off | red light flashes 3 times |
| Charging | red light on |
| Full | red light off |
More to read: BLUETOOTH EHN007 EARMUFF
Views: 2