How to program two way radios to talk together?

Retevis two way radio all can talk with each other.  Here is how to program two way radios to talk together:

1, Buy a programming cable

Most kenwood 2 pin radios use the same programming cable, but not all, you need ask us first when you buy the right programming cable to programme the radio.

Here is a sheet show you how to choose the right one, you can just search the SKU directly on our website to get it:

Radio Model No.Programming cable SKU
RT29/RT48/HD1/RB23/RB46/NR30J9131P
RT47/RT87/RT83J9137P
RT20/RB19/RT22P/RB66J9138P
RT97LP20061301
RT22/RT21/H777/RT68/RB38V/RB89C9018A

 

2, How to download software:

Most software need ask from us, some software can download from our radio website page: in the Support part: Just search rhe radio model and chooe a link to open.

Such as RT29

3, Most radio need program on windows system. The following are also can program on MAC using chirp:

4, After you installed the software and driver on your computer, you need link your radio to your computer, then check the (My Computer-Management-Device Manager-Port), the choose the right port for your software:

RT29 as an example:

After choose the right port, click “Program” -“Read from radio” , you can start write the frequency you need and the functions you want to set up. Be sure make two radios are same frequency and CTCSS/DCS at same channel is ok.

The above is how to program two way radios to talk together, if you need more support, you can leave us a message our website, we will reply you within 24 hours.

And for digital radios, it is a little complicated because it has more funtcions, such as group call, all call, but also similar way.

More to read:

How to use chirp to program?

 

 

 

Views: 26

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top