This article introduces some RT86A related operation steps. If you encounter problems during use, you can refer to this article.
1. RT86A one-button turn on and off sub-audio operation steps.
A:1. After shutting down, press side button 2 + PTT button to turn on the machine. With a beep, all channels of sub-audio are turned off with one button (turning off and then restarting the machine will still turn off the sub-audio);
2. Repeat the action again. With two beeps, all channels of sub-audio are turned on again with one button (turning on and off sub-audio is a temporary action. When the software reads it, the sub-audio is still the original factory state without change)
2. RT86A wireless cloning operation steps.
A:1. Adjust the receiver to channel 1, press side button 1 to turn it on after shutting down, and enter the infinite copy receiving mode after seeing the green light flashing and hearing three “beeps”.
2. Adjust the transmitter to channel 2, press and hold side button 1 to turn it on after shutting down, and enter the infinite copy transmitting mode after seeing the red light flashing and hearing three “beeps” ·
3. Press the PTT button of the transmitter. The red light flashes and data is being transmitted at this time. Restart the transmitter manually to exit this mode.
4. The red and green lights of the receiver flash crosswise, and the receiver is receiving data. When the receiver receives the data, the power is restarted.
5. The transmitter needs to be turned off and then turned on again to exit the wireless copy mode before it can communicate with the copied machine
Note: Only RT86A can clone RT86A; the side key function is not copied by default; but the software can choose to copy the side key function.
3. RT86A one-key frequency binding operation steps.
A:1. RT86A first enters one-key decoding mode: in the off state, press and hold the PTT button to turn on the machine, wait for 3S, there will be a “beep” sound and the red and green lights will flash alternately, broadcasting the current channel, release the PTT button, and the red light will flash
2. Transmitter: Turn on the machine and rotate the channel switch to the target channel (covering the channel frequency), press and hold the PTT button to transmit, enter the copy function state, and transmit to the test machine (receiver), (be careful not to release the transmitter ptt in a hurry)
3. The RT86A red light turns green, indicating that the transmission frequency test is successful and saved. After the green light remains for a while, there is a “beep” sound, which means success and saving; after completion, you can talk to the transmitter.
4. The copied frequency can still be saved when turning off and on. If you want to copy the next channel, you need to repeat operations 1.2.3
If you have any operational questions, please feel free to add them at any time.
Views: 0