How to get original RT3S settings-laura-5

How to get original RT3S settings

How to get original RT3S settings

Retevis RT3S is a DMR Dual band Radio , Dual Time Slot, 2000mAh high battery capacity, Long range handheld, GPS or non-GPS can be chosen from. It has always been loved by consumers.

Some consumers may have lost the Retevis RT3S default factory settings file due to computer replacement or other problems. And the parameters of their radios have been changed.

At this time, how to get back the original frequency settings of Retevis RT3S?

How to get original RT3S settings-laura-1

 

1/Software and USB driver

You can open the website and click the support, you will find the corresponding software, choose your radio version and download:

https://www.retevis.com/rt83-ip67-waterproof-dmr-radio-for-businesses-with-screen-gps

How to get original RT3S settings-laura-2

(If you don’t have the programming cable, you can buy it through the link directly : J9110P: https://www.retevis.com/original-usb-programming-cable-for-rt3s-rt3-rt8-rt52)

2/Unzip the folder

After unzipping the RT3S software folder, you can see the factory frequency file of RT3S.

How to get original RT3S settings-laura-3

3/Reset the frequency

After connecting the walkie-talkie to the computer with a programming cable, choose the com port,  then open the factory frequency file in the software. Finally,  write it into the walkie-talkie.  Then you will reset the RT3S.

How to get original RT3S settings-laura-4

If you have any questions or interest in the radios, please feel free contact laura@retevis.com, thanks!

More to read: HOW TO UPGRADE THE RT3S FIRMWARE

 

 

Views: 58

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top