How to program Retevis RT25 software?

Retevis RT25 is a new arrival analog radio, because of strong functions like main channel and remote kill, and elegent design, it’s very popular among Retevis fans. Do you know how to program Retevis RT25 software? Today, let’s discuss step by step:

Download and install RT25 software:

Step:1 Please download and install RT25 USB driver (USB Universal Driver) and software in RETEVIS official website https://www.retevis.com/resources-center/
Step 2: You need a programming cable J9124P
Step 3: Connect your RT25 with you PC, using progrogramming cable
Step 4: Turn on the radio RT25.
Step 5: Now we come to RT25 software interface

Step 6: Choose the correct communication port
(computer-device manager:)
.Step 7: Click” Read from Radio” in “Program” Column

Programming in RT25 software:

Step 8: Write the date, such as “RX frequency”, “TX frequency” CTC/DCS DEC and CTC/DCS ENC in to the channels
For example:
RX frequency:462.2375
CTC/DCS DEC: 67
TX frequency 462.2375
CTC/DCS ENC: 67

Final Step 9:Click “Write to Radio”. Then all date will be saved to radio.

If you always standby in a main channel, but sometimes you need talk on other channel, then set the main channel and Main CH Reset time is very convenient. Such as your main channel is channel 5, sometimes you also talk on channel 1. Then after you finish talking on channel1 each time, when time interval is 》=50s, then it automatically comes to standby in channel 5 again.

Any questions for RT25 software, please feel free to contact kam@retevis.com , we are always here. Thanks!

Views: 18