How to pair EEK013 Bluetooth Headset with RT22
1.Built-in microphone, compatible with android, iphone, laptop and car connections made with high quality chip, noise-cancelling wireless bluetooth headphones. Easy to carry and operate, designed with 360-degree adjustable ear hooks to keep the earpiece in place.
2.Connect the bluetooth headset to your two-way radio or mobile phone, and you can switch the device you need to use according to the signal. And compatible with standard Kenwood 2Pin connectors;
3.The wireless finger walkie-talkie connects with the bluetooth headset and walkie-talkie to fix the finger walkie-talkie on your fingers, steering wheel, handlebars or other easy-to-operate places. Make conversations safer and easier while driving.
Applications:
Bluetooth Earpiece are widely used in police, army, night clubs, bars, paintball, security, restaurants, hotels, bodyguards, warehouses and noisy environments. Clear sound performance.
When you receive EEK013 Bluetooth Headset with Wireless PTT, how to pair it with your walkie-talkie? Take RT22 radio as an example.
I. Pairing a walkie-talkie with a Bluetooth headset
1. First turn on the RT22 walkie-talkie, then insert the adapter into the walkie-talkie,
2. Press and hold the power button of the adapter, let go after the blue light is always on. When the adapter flashes red and blue, it enters the pairing state.
3. Turn on the headset, the headset flashes red and blue, and it starts to pair with the adapter. The pairing is successful, and the blue light of the adapter flashes slowly.
Note: Do not turn off the headset or adapter at this time,
II. Finger PTT and adapter pairing
1. Press and hold the finger PTT to turn it on, let go after the blue light is on, and when the blue light flashes quickly, the finger PTT enters the pairing state.
2. Short press the power button of the adapter, the adapter will flash red and blue, and it will enter the pairing mode with finger ptt.
3. The finger ptt blue light flashes slowly, indicating that the pairing is successful.
Views: 28
I did this and it has horrible feedback when I push the button
I have followed these instructions as well and still get static, horrible feedback when I push the bottom as well.