RB37 bluetooth walkie-talkie-laura-2

How to set the wireless copy function of the RB37 walkie-talkie

How to set the wireless copy function of the RB37 walkie-talkie

Retevis RB37 Walkie Talkies is an license-free Long Range Two Way Radio with Wireless Earpiece, 22 channels
Features:
1.pairing a walkie talkie with Bluetooth frees up your hands and makes things more convenient,
2.Built in 2000 mAh rechargeable lithium battery; can work continuously for 15-20 hours; standby time is up to 7 days; low battery alarm will remind you to charge in time; TYPE-C charging interface avoids plugging and unplugging troubles
3.50 CTCSS and 232 DCS provide a clear and safe calls; 0-9 level VOX can free your hands when you are busy; and ensure the quality of the call
4.0-9 level squelch function can reduce the noisy noise in the surrounding environment; suitable for outdoor camping; hunting; skiing and other occasions;
5.One-key parameter function wireless copy can quickly copy the radio parameters to other radios; save time and improve efficiency

RB37 walkie-talkie wireless copy function-laura-2
How to set the RB37 walkie-talkie wireless copy function ?

The operation steps:

1.Press and hold the PF2 key of the receiver, turn on the power at the same time, and continue to hold the PF2 key for about 1 second. After seeing the green light flashing and hearing three beeps, it enters the wireless copy receiving mode.

2. Press and hold the PF1 button of the transmitter, turn on the power at the same time, and keep pressing the PF1 button for about 1 second. After seeing the red light flashing and hearing three beeps, it enters the wireless copy transmission mode.

3. Press the PTT button of the transmitter, the red light is flashing and data is being transmitted at this time, and it will automatically exit this mode after restarting.

4. The traffic lights of the receiver are flashing crosswise. At this time, the receiver is receiving data. When the receiver finishes receiving the data, the power will be restarted.

Note: The wireless copy frequency and ID code of the transmitter and receiver must be the same to transmit data. The wireless copy frequency and ID code can be changed by the programming software.

Visits: 97

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top