RT45 communicate RT83 DMR radio, RT45 is a analog radio, RT83 is a digital radio. How to make a analog radio to communicate with DMR radio?
Firstly, please download USB driver and RT45 and RT83 programming software
Here’s download address: https://www.retevis.com/resources-center
RT45 FRS default frequency as below:
How to write RT83 digital radio
In zone 2, all channels are analog channels, programme RT83 frequency in analog mode following:
Tx=Rx frequency=462.56250 ctcss/dcs= 67.0
After done, please write RT83 radio to keep the frequency you just programmed
Secondly, How to make RT45 FRS communicate RT83 radio
Taking one frs RT45, change channel to one. As for RT83, please find this channel one in zone. Then try to make RT45 communicate RT83. if they can communicate each other that indicate the programming is success, if not, please double check your programming steps
Do you know how to make analog radio communicate RT45 Frs radio,there’s a article for you refernce: How RT24 walkie talkie communicate with RT45: https://www.twowayradiocommunity.com/how-rt24-communicate-with-rt45/
If you still have some questions about how to make RT45 FRS communicate RT83 radio, please directly contact us by email, vip@retevis.com, we will offer programming support
Views: 244