There are two ways to programme RB20 POC network radio, please follow up me to operate it
1.Programme by computer
a.Need a programming cable J9110P
https://www.retevis.com/original-usb-programming-cable-for-retevis-rt3-rt8-radio-us
b.Download and install the USB driver and programming software by the link below
https://www.retevis.com/rb20-poc-network-two-way-radio-us-us
When you install the USB driver, there is a manual for reference
After install it, you will see COM in your device manager, it shows driver installed successfully
Firstly click ‘read’ then ‘write’ to save settings
2.Over the air code writing operation
a.Turn on the radio-Setting→FW Update→Account OTA
b.Turn on ‘CfgTool‘ of RB20 software on the computer
ensure that the meid and IP and code writing is the same of the radio
There is a video for reference: https://www.youtube.com/watch?v=HXWjD9l7-SI
Do you know how to programme RB20 POC network radio by steps above?
In the process, if you have any questions for RB20 POC two way radio, please feel free to leave message under the post, or email to info@retevis.com
Views: 27