How to set RT43 private call is the topic today we will discuss. RT43 is UHF(400-480mhz) DMR radio, which has the private call and group call function.
Preparation: install RT43 software
1.Pls download and install USB universal driver and software for RT43 from Retevis official website
https://www.retevis.com/resources-center/
2.Connect your RT43 to the computer, using C9108A programming cable
(Pls note keep RT43 opened)
C9018A: https://www.retevis.com/2-pin-programming-cable-for-retevis-h777
3. Open RT43 software interface
How to set RT43 private call
Take RT43( radio ID: 3556325), want to private call HD1(radio ID: 1234) as an example
1. Check the radio ID of RT43 in software
2.Set the digital individual/private contact in RT43 radio
The Key point for setting private call:
We must set the call ID to be the radio ID of our private call partner. Such as RT43 would like to private call HD1, we just set Call ID of HD1 (1234)
3.Set communication channel information
Frequency: tx=rx frequency=413.23500
Color code: 1
Slot:1 (if connect to the repeater)
Contact name: call 1
4. Write to the radio to save all information
5. Programming accordingly in HD1 software
Realize private call in 2 ways:
1.manual dial
Rebooting the radio on ID 1234(HD1)—>
Menu–Contacts—>Manual Dial—>3556352—>Menu—>Call Alert—>Menu to confirm
Then radio ID 3556352(RT43) will receive a private call, then both radios can communicate.
2.call contacts directly
Rebooting the radio on ID 1234(HD1)—>Menu—>band A set—>Menu—>Contacts—>private call—>Menu to confirm
Then radio ID 3556352(RT43) will receive a private call, then both radios can communicate.
After done! Any questions about RT43 private call, please feel free to contact us by email,vip@retevis.com
Views: 113