RETEVIS RT22, A new born retevis two way radio. Real 2W portable walkie talkie, 1000mAh Li-ion Battery, longtime standby, Dust proof speakers, high-definition sound quality, will bring you an unprecedented experience! if you love radios, you will love it!
RT22 Special features:
Extreme Ultra-thin
RETEVIS RT22, pair two way radios. The radio thickness is only 0.84 inch (2.14 cm). Never seen a radio such thin like it. so it is easy to carry or easily to be put in your pocket.
Professional Battery
Professional Lithium Battery, DC 3.7V, Much better design of the battery than other radios. The battery is easy to disassemble, so convenience to use, and this radio support USB charging, it is much efficient and so fast.
Short Antenna
RETEVIS RT22, equipped with strong signal short antenna. the antenna is the shortest one among the radios for now. Superb performance and penetration, efficient receive signals. you can use it in the underground parking lot without any problems.
Military Quality
High quality precision circuit design, Shell quit satisfactory workmanship, Material good, Matte surface can significance be felt in the hands.
Small & Beautiful
Simple and elegant Design, easy to carry, longtime standby, can reach longer distance than normal analog radio, which makes it suitable for all kinds people,especially for the enthusiasts.Such a best choice, you are worth to own it.
RT22 Special features:
| Model Number | RT22 |
| Frequency Range | UHF:400-480MHz |
| Power | 2W |
| Colour | Black |
| Channel Capacity | 16 |
| Battery capacity | Li-ion 1000mAh |
| Working Voltage | DC 3.7V |
| Mic/Speaker/Programming Port | 2 pin plug type for Kenwood |
| Antenna | Integrated antenna |
| Antenna Impendence | 50Ω |
| Weight Of Two Way Radio (Include battery and antenna) | 3.99oz(113g) |
| Size Of Two Way Radio | 5.32×2.16×0.84inch(13.5×5.5×2.14cm) |
| Transmitter | |
| Output Power | 2W |
| The Maximum Deviation | ≤±5KHz |
| Residual radiation | <60dB |
| Current | ≤1000mA |
| Audio Response | +7~-12.5dB |
| Receiver | |
| Sensitivity | ≤0.16μV(12dB SINAD) |
| Squelch Sensitivity | <0.2μV |
| Intermodulation | 50dB |
| Audio Power | ≥300mW |
| Current | ≤100mA |
| Squelch Current | 20mA |
You can own it on www.retevis.com, or click here;
https://www.retevis.com/index.php/rt22-short-antenna-usb-charge-2w-walkie-talkie#
Welcome any comments to us .
Facebook : https://www.facebook.com/retevis/
Tweeter : https://twitter.com/retevis_com
E-mail : kam@retevis.com
Phone Number : 0371-60904058
Views: 0
Is there going to be a gang charger for these units
For now ,no .
Will you work with Chirp project to support RT22 programming with the Chirp software? I don’t see RT22 in the chirp’s list of requested new radio models to support
This is ongoing , you will see RT22 software later on Chirp .
Yes, you could use chirp programming software program RT22 now.
What are the default frequencies stored in each memory slot 1-16?
pl check your email. i have send to you.
Please may you send me the default frequencies on my newly bought retevis rt22. I do not have a programming cable.
thank you.
The default frequencies are sent to you by email,please pay attention to check it !
Please may you guide me on how to use vox on my newly bought retevis rt22. I do not have a programming cable.
thank you.
Sorry,you need a programming cable to set the VOX function for Retevis RT22
Just bought RT22 from a retailer + programming cable + extra charging docks. My first impression is that RT22 is very easy to program and operate. Super simple minimalistic design. I really love voice announcement replacement for display.
Hello, dear
Thanks for your feedback, so glad to know you like RT22!
Brgds,
Elsa Jin
Will the RT22 work with the current RT21 without doing anything special?
Totally messed first question up. Sorry
Hi,I am sorry, for RT21 and RT22,you need to program them with the same frequencies and same CTCSS/DCS, then they can work together!
If any,please feel free to contact us!
We currently have 10 Retevis RT21 radios. Looking to add more. Is it better to get the same model RT21 so they will work on the same frequency, or can the RT22 be set to the same frequency?
Hi, please check your RT21 to know if it is the license-free version, if yes, then the RT21 can talk with RT22 no need to program.
What do I need, as well as can I program to a specific ip/ channel for large paintball games?
hi, have you bought the radios?
If you have, we can help you to program the radios. for RT22, now it is the license-free band, if you don’t want to program, you can use the default channel.
If not, please contact us on facebook: http://www.facebook.com/retevis
we can talk about how to use them