Programming Information for Retevis RT24 Two Way Radio (One)

Retevis company has produced a new two way radio retevis RT24 walkie talkie, Which is 0.5 watt PMR 446 license free radio. Today I will tell you some details information about the how to programming it in the software.

RT24 Programming Software

First, you need to download RT24 programming software on our website:
https://www.retevis.com/resources-center/  
It use universal driver.you could download it and choose the correct driver compatible with your PC system.

Programming Cable

Second, RT24 compatible with universal kenwood 2 pin standard programming cable, SKU C9018A.
https://www.retevis.com/2-pin-programming-cable-for-revevis-h777-baofeng-kenwood
Third, after you install the driver and programming software, connect the radio to the PC by programming cable firmly. Make sure there is no connecting problem to disturb the programming. Turn on the radio, Open the programming software, choose the correct communication port. Read from radio, you will get the information as the picture following;

From this programming page, you could know almost all the information of retevis RT24 radio. Such as the normal functions; VOX, Squesch, TOT, Battery Save, Beep Tone, Language and so on. What people always need to set on RT24 is the Channel table information. For example: TX frequency, RX frequency, CTCSS & DCS, Wide or Narrow band, Scan, TX power, Busy lock, Scramble and Compander.


Retevis RT24 is PMR 446 license free radio, so people no need to set the frequency, just change the CTCSS & DCS, set the scramble function, then it will be good communication without any disturb and there will be nobody could hear the communication details. In order to make the communication clear enough, you could set the compander function, it will keep transmit the voice as original as possible.
After you change the data information, writing it to radio is the last step. Then you could use the programmed radios to communicate with your partners.

Contact Us

Any questions about retevis RT24 two way radio, please send us email at: Support@retevis.com, and kam@retevis.com.

Views: 921

14 thoughts on “Programming Information for Retevis RT24 Two Way Radio (One)”

  1. Phillip Adams

    I can’t find the Programming Software for the RT24 on the CD or on your website would you send me a link

  2. Hi,

    I was very impressed with the Retevis RT24. but I have a question. For me the biggest problem is that the Retevis RT24 does not have beep when press/leave the PTT button also when another person receive a sound, I want to ask if it is possible to activate it in any way? Thanks.

      1. how to activate the roger beep function? neither cant find it in the software nor in the manual…

  3. ho radioline RT24 acquistate qualche anno fa. Ho scaricato il nuovo software per RT24 ma non riesco a leggere i dati . indica la scritta “FAIL” . avevo un file .dig ma non lo carica. Come faccio?

  4. Hallo
    wollt gerade die software runter laden da sagt mir mein rechner das es die seite nicht mehr gibt. gibt es noch einen anderen link zur software?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top