How to programme RT27 in software
Retevis RT27 is one kind of license-free business Analog radio. It meet USA, EU, Canada license-free frequency standard.
1.RT27 license-free 22 CH FRS 12.5KHz 0.5W/2W Handheld Two Way Radio—-USA Frequency Standard
2.RT27 license-free 16 CH 0.5W 12.5KHz PMR446 Handheld Two Way Radio—-EU Frequency Standard
3.RT27 license-free 16 CH FRS 12.5KHz 0.5W Handheld Two Way Radio—-Canada Frequency Standard
Now let’s we check how to programme RT27 by software.
Same Retevis radio model no. is with same default settings.
For new RT27, just switch the new radios in same channel, they can communicate directly.
Programme RT27 when you need make some changes:
Step:1 Please download and install RT27 USB driver (USB Universal Driver) in RETEVIS official website https://www.retevis.com/resources-center/
Step 2: You need a programming cable C9018A
Step 3: Connect your RT27 with you PC, using programming cable.
Step 4: Turn on the radio RT27.
Step 5: Now we come to RT27 software interface
Step 6: Choose the correct communication port
(check in computer-device manager)
Step 7: Click” Read from Radio” in “Program” Column
Step 8: Write the date, such as QT/DQT Dec and QT/DQT Enc into the channels
For example:
RX frequency:462.56250
CTC/DCS DEC: 127.3
TX frequency 462.56250
CTC/DCS ENC: 127.3
(Note: the RT27 is license-free radio, so the frequency can’t change, just can set up QT/DQT data.)
When u always can hear other radio noise, u can change the CTCSS/DCS(QT/DQT).
Finally Step 9: Click “Write to Radio”. Then all dates will be saved to radio.
Need know more about RT5R? Please feel feel to write to us. vip@retevis.com, thanks.
Views: 649
Is it possible to program the rt27 and rt27v with Chirp?
sorry, now the chirp software doesn’t suppport the model RT27 and RT27V, if you want to program, you can download from our website: https://www.retevis.com/resources-center/
Is it possible to deactivate four channels so just one is available? I only need one channel without my family bumping the knob to a different channel.
Hi, would you please tell me which model do you use? The RT27V?
Yes I am considering the RT27V five channel MURS model.
Yes, considering a VHF Murs, RT27V.
We are so sorry for this, there is no solution to help you fix the frequency, because this radio only have 5 channels
What about activating Scan and only choose ADD on one channel and REMOVE on the other four channels of the RT27V?
Hi,
if you want to active the Scan, you need to at least chose 2 channels
I can’t find the RT27 programming software on your website. Where can I download it?
Hi, you can download here:https://www.retevis.com//resources_center/software/RT27_programming_software.zip
but if your radio with 22 channels, please download here: https://www.retevis.com//resources_center/software/RT27-22CH.zip
Hello,
I was wondering if you have a link, to the programming software, for the
RT27V MURS radio, I can’t seem to find it on your website?
Thanks!
HELLO! YOU CAN HAVE A LOOK AT THIS!https://www.twowayradiocommunity.com/index.php/how-to-download-software-from-retevis/
Hi James,
I searched as you indicated and there was no link to the software.
Is there another link to get the software?
>>>
“HELLO! YOU CAN HAVE A LOOK AT THIS!https://www.twowayradiocommunity.com/index.php/how-to-download-software-from-retevis/”
>>>
“Hello,
I was wondering if you have a link, to the programming software, for the
RT27V MURS radio, I can’t seem to find it on your website?
Thanks!”
Click the “support”, then click “firmware/software”https://www.retevis.com/RT27-FRS-or-PMR-License-free-Portable-Walkie-Talkies/#A9133D
Hi, This link is broken or no longer exists….https://www.retevis.com/resources-center/ can you advise? I purchased 3 RT27V MURS 5 channel radios and
I’d like to know more about them and about firmware and/or programming updates etc.
I also have an Ailunce HD1 dual band DMR radio and I’m very pleased with the customer/produce support for that radio.
Thank you,
Hello! please read this one,thanks https://www.twowayradiocommunity.com/index.php/how-to-download-software-from-retevis/
I have a set of 5 RT27’s. One radio has stopped receiving but transmits perfectly.
Any idea’s?
Hello!
1. When did the radio fail to receive it?
2. Are the CTCSS settings of the walkie-talkie right?
3. The transmission is normal, can the other radio receive normally?
4. What response of indicator when receiving?
Can I program RT27V 5 channel to work with 22 channel radios?
Hi, dear, very sorry for the delay! for MURS radios and FRS and PMR radio, they have different frequency section, we will send you a file, please have a try and have a nice day!
Hello, We bought 60 Retevis RT27 and we already have 100 Baofeng UV-5R, the problem we have is when we speak in the rRetevis we hear in Baofeng, but when we speak in Baofeng we hear nothing in the Retevis … what is the solution ??? please
hi, please check the CTCSS/DCS.
if you want the analog mode radios talk with each other, you need to make the CTCSS/DCS codes same. Or You can off the codes.
I have RETEVIS RT27. I have programming cable and software. I tried programming the radio by adding scramble and tones. I turned radio on, now a red light remains on and I cannot transmit or receive. I tried reading data from radio on the programming software, but it won’t read from or to the radio anymore. please help.
Hello,
hae the same Problem as Daid has. Solid Red lED after Adjusting scramble.
anny Idea what to do to get it working again?
The same problem:( help please
same prob . what is the solution ?
Same problem, what is the solution?
We have Rt27 22 channel radios and I bought two more. The band width on the existing radios is wide but the frequency on the new radios is all narrow. Is there any way to program more options, i.e. bandwidth on the new radios?
can not find software to program the rt-27 please help