Wireless copy UHF handheld radio

Retevis RB626 is a wireless copy UHF handheld radio, which can be paired to each other for programming instead of using the PC software, let us learn about this feature.

https://www.retevis.com/rb626-uhf-2000mah-type-c-rechargeable-walkie-talkies-eu

Wireless copy UHF handheld radio

Wireless copy operation steps:
1. Press and hold the PF2 button of the receiver, turn on the power at the same time and continue to hold the PF2 button for about 1 second.
After seeing the green light flashing and hearing three beeps, it enters the wireless copy receiving mode.

2. Press and hold the PF1 button of the transmitter, turn on the power at the same time and continue to hold the PF2 button for about 1 second.
When you see the red light flashing and hear three beeps, it enters the wireless copy transmission mode.

●Press the PTT button of the transmitter, the red light will flash while transmitting data, and it will automatically exit after rebooting.
the mode.
●The traffic lights of the receiver flash crossly while receiving data. When the receiver finishes receiving the data, the power supply will restart.

Note: The wireless copy frequency and ID code of the transmitter and receiver must be the same to transmit data.
The copy frequency and ID code can be changed through the frequency writing software. Our factory settings are all the same. If there is no change, there is no need to set this place.

RB26 is a GMRS radio which has same wireless copy feature, there is an article for refernce about how to Use Wireless Copy Function of RB26.

How to Use Wireless Copy Function of RB26

If you have any questions in process to pair wireless copy UHF handheld radio, please feel free to contact us by email, info@retevis.com

Views: 3

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top